5-21
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 5 Configuring the Management Interface and Security
Configuring the Available Interfaces
Options
The following options are available:
•
name
— name of the user whose privilege level is set
•
level
— the privilege level permitted to the specified user. These levels correspond to the CLI
authorization levels, which are entered via the
enable
command:
–
0 — User
–
10 — Admin
–
15 (default) — Root
Step 1
From the SCE(config)# prompt, type
username
name
privilege
level
and press
Enter
.
How to Add a New User with Privilege Level and Password
Use these commands to define a new user, including password and privilege level, in a single command.
Note
In the config files (
running config
and
startup config
), this command will appear as two separate
commands.
•
Options, page 5-21
•
How to Add a User with a Privilege Level and a Clear Text Password, page 5-22
•
How to Add a User with a Privilege Level and an MD5 Encrypted Password Entered in Clear Text,
page 5-22
•
How to Add a User with a Privilege Level and an MD5 Encrypted Password Entered as an MD5
Encrypted String, page 5-22
Options
The following options are available:
•
name
— name of the user whose privilege level is set
•
level
— the privilege level permitted to the specified user. These levels correspond to the CLI
authorization levels, which are entered via the
enable
command:
–
0 — User
–
10 — Admin
–
15 (default) — Root
•
password
— a clear text password. May be saved in the local list in either of two formats:
–
as clear text I
–
n MD5 encrypted form if the secret keyword is used
•
encrypted-secret
— an MD5 encryption string password