![background image](http://html.mh-extra.com/html/cisco/sce-1000-and/sce-1000-and_configuration-manual_64496073.webp)
3-11
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 3 Operations
Managing Application Files
How to Upgrade an Application
Step 1
From the SCE(config if)# prompt, type
pqi upgrade file
filename [options]
and press
Enter
.
Upgrades the current application with the specified pqi file using the installation options specified (if
any). Use the
show pqi file filename info
command to display installation options available for the
application file. (See
How to Display Information about an Application File, page 3-10
.)
Note that this may take up to five minutes.
How to Undo an Upgrade of an Application
Step 1
From the SCE(config if)# prompt, type
pqi rollback file
filename
and press
Enter
.
Undoes the upgrade of the specified pqi file.
Note that this may take up to five minutes.
How to Display the Last pqi File that was Installed
Step 1
From the SCE> prompt, type
pqi last-installed
and press
Enter