9-22
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 9 Managing Subscribers
Monitoring Subscribers
How to display subscribers that are mapped to a specified IP address, or range of IP addresses
Options
The following options are available:
•
ip-range
— IP address (x.x.x.x) or range of IP addresses (x.x.x.x/y) to match
•
vpn-name
(optional) — The name of the VPN in which to search for the IP address
Step 1
From the SCE> prompt, type
show interface linecard 0 subscriber mapping IP
ip-range
[VPN
vpn-name
]
and press
Enter
.
How to display subscribers that are mapped to IP addresses that are included in a given IP address or IP range
Options
The following options are available:
•
ip-range
— IP address (x.x.x.x) or range of IP addresses (x.x.x.x/y) to match
•
vpn-name
(optional) — The name of the VPN in which to search for the IP address
Step 1
From the SCE> prompt, type
show interface linecard 0 subscriber mapping included-in IP
ip-range
[VPN
vpn-name
]
and press
Enter
.
How to display subscribers that are mapped to a specified VLAN ID
Options
The following options are available:
•
VLAN-id
— VLAN ID to match
Step 1
From the SCE> prompt, type
show interface linecard 0 subscriber mapping VLAN-id
VLAN-id
and press
Enter
.
How to display subscribers that are mapped to a specified MPLS/VPN
Options
The following options are available:
•
pe-id
— loopback IP address of the relevant PE router
•
bgp-label
— label of the relevant BGP LEG
Step 1
From the SCE> prompt, type
show interface linecard 0 subscriber mapping MPLS-VPN PE-ID
pe-id
bgp-label
BGP-label and press
Enter
.