![background image](http://html.mh-extra.com/html/cisco/sce-1000-and/sce-1000-and_configuration-manual_64496119.webp)
5-25
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 5 Configuring the Management Interface and Security
Configuring the Available Interfaces
Configuring AAA Accounting
Use this command to enable or disable accounting.
•
Options, page 5-25
•
How to Enable AAA Accounting, page 5-25
•
How to Disable AAA Accounting, page 5-25
If accounting is enabled, the SCE platform sends an accounting message to the
server after every command execution. The accounting message is logged in the server for
the use of the network administrator.
By default, accounting is disabled.
Options
The following options are available:
•
level
— The privilege level for which to enable the accounting
How to Enable AAA Accounting
Step 1
From the SCE(config)# prompt, type
aaa authentication accounting commands
level
default
stop-start group
and press
Enter
.
The
start-stop keyword
(required) indicates that the accounting message is sent at the beginning and
the end (if the command was successfully executed) of the execution of a CLI command.
How to Disable AAA Accounting
Step 1
From the SCE(config)# prompt, type
aaa authentication accounting commands
level
default
and
press
Enter
.
Monitoring Servers
Use these commands to display statistics for the servers.
•
How to Display Statistics for Servers, page 5-25
•
How to Display Statistics, Keys and Timeouts for Servers, page 5-26
How to Display Statistics for Servers
Step 1
From the SCE# prompt, type
show TACACS
and press
Enter
.