5-17
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 5 Configuring the Management Interface and Security
Configuring the Available Interfaces
•
key-string
— encryption key that the server and client will use when communicating with each
other. Make sure that the specified key is actually configured on the server host.
–
Default = no key or user-configured global default key (see
How to Define a Global Default Key,
page 5-17
.)
Step 1
From the SCE(config)# prompt, type
TACACS-server host
host-name
[
port
portnumber
] [
timeout
timeout-interval
] [
key
key-string
]
and press
Enter
.
How to Remove a Server Host
Options
The following options are available:
•
host-name
— name of the server to be deleted
Step 1
From the SCE(config)# prompt, type
no TACACS-server host
host-name
and press
Enter
.
How to Configure the Global Default Key
Use this command to define the global default key for the server hosts. This default key can
be overridden for a specific server host by explicitly configuring a different key for that
server host.
•
Options, page 5-17
•
How to Define a Global Default Key, page 5-17
•
How to Clear the Global Default Key, page 5-18
Options
The following options are available:
•
key-string
— default encryption key that all servers and clients will use when
communicating with each other. Make sure that the specified key is actually configured on the
server hosts.
–
Default = no encryption
How to Define a Global Default Key
Step 1
From the SCE(config)# prompt, type
TACACS-server key
key-string
and press
Enter
.