5-56
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 5 Configuring the Management Interface and Security
IP Configuration
Options
The following options are available in the IP advertising commands:
•
interval
— The time interval between pings in seconds.
default interval = 300 seconds
•
destination
— The IP address of the destination for the ping requests
default destination = 127.0.0.1
How to Enable IP Advertising
Step 1
From the SCE(config)# prompt, type
ip advertising
and press
Enter
.
Enables IP advertising.
How to Configure the IP Advertising Destination
Step 1
From the SCE(config)# prompt, type
ip advertising destination
destination,
and press
Enter
.
Configures the destination for the IP advertising pings.
How to Configure the IP Advertising Interval
Step 1
From the SCE(config)# prompt, type
ip advertising interval
interval,
and press
Enter
.
Configures the frequency of the IP advertising pings.
Configuring IP Advertising: Example
The following example shows how to configure IP advertising, specifying 10.1.1.1 as the destination and
an interval of 240 seconds.
SCE(config)#ip advertising destination 10.1.1.1 interval 240
How to Display the Current IP Advertising Configuration
Step 1
From the SCE> prompt, type
show ip advertising
and press
Enter
.
Displays the status of IP advertising (enabled or disabled), the configured destination, and the configured
interval