![background image](http://html.mh-extra.com/html/cisco/sce-1000-and/sce-1000-and_configuration-manual_64496180.webp)
6-14
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 6 Configuring the Line Interface
Configuring VLAN Translation
How to Display the IPinIP Configuration
Step 1
From the SCE# prompt, type
show interface linecard 0 ip-tunnel IPinIP
and press
Enter
.
Displays the current configuration for the specified tunnel option.
How to Display the Logged-in VPNs
Options
The following options are available
•
vpn-name
—The name of a specific currently logged-in VPN for which to display details.
•
all-names
—Use this keyword to display all the VPN names that are currently logged into the
system.
Step 1
From the SCE> prompt, type
show interface linecard 0 VPN {name vpn-name | all-names}
and press
Enter
.
How to Display the Asymmetric L2 Support Mode
Step 1
From the SCE# prompt, type
show interface linecard 0 asymmetric-L2-support
and press
Enter
.
Configuring VLAN Translation
•
VLAN Translation Features and Limitations, page 6-15
•
Setting the VLAN Translation Constant, page 6-16
•
How to Disable VLAN Translation, page 6-17
•
How to Monitor VLAN Translation, page 6-17
Some topologies require the SCE platform to be able to translate between different VLAN tags.
Figure 6-2
illustrates an example of such a system, in which one router acts as a dispatcher, forwarding
traffic and performing load balancing between two SCE 2000 platforms.