2-13
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 2 Command Line Interface
Navigational and Shortcut Features
Auto-Completion
The CLI interface features tab completion. When you type in the first letters of a command and type
<Tab>
, the system automatically fills in the rest of the command or keyword. This feature works only
when there is one command that could be possible using the starting letters.
Example 1
The letters
snm
followed by
<Tab>
will be completed to the command
snmp-server
.
SCE(config)#
snm
<Tab>
SCE(config)#snmp-server
If you type
<Enter>
instead of
<Tab>
, and there is no ambiguity, the system actually carries out the
command that is the result of the auto-completion.
Example 2
The following example displays how the system completes a partial (unique) command for the
enable
command. The system carries out the command using the default authorization level (10) when you press
Enter
.
SCE>en <Enter>
Password:
sce#
Example 3
The following example illustrates how to use the completion feature with a non-default value for the
argument. In this example, the
enable
command is completed using the specified value (15) for the
authorization level.
SCE>en 15 <Enter>
Password:
sce#
FTP User Name and Password
CLI enables saving FTP user name and password to be used in FTP operations—download and upload,
per session.
These settings are effective during the current CLI session.
The following example illustrates how to set FTP password and user name and the use in these settings
for getting a file named
config.tmp
from a remote station using FTP protocol.
sce#
ip FTP password 1234
sce#
ip FTP username cisco
sce#
copy ftp://@10.10.10.10/h:/config.tmp myconf.txt
connecting 10.1.1.253 (user name cisco password 1234) to retrieve config.tmp
sce#