![background image](http://html.mh-extra.com/html/cisco/sce-1000-and/sce-1000-and_configuration-manual_64496160.webp)
5-66
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 5 Configuring the Management Interface and Security
Configure SNTP
How to Remove One SNTP Server
Options
The following option is available:
•
ip-address
— the IP address of the SNTP unicast server.
Step 1
From the SCE(config)# prompt, type
no sntp server
ip-address
and press Enter
Removes the specified SNTP unicast server.
How to Define the SNTP Unicast Update Interval
•
Options, page 5-66
•
Defining the SNTP Unicast Update Interval: Example, page 5-66
Options
The following option is available:
•
interval
— the time in seconds between updates (64 through 1024)
default interval = 900 seconds
Step 1
From the SCE(config)# prompt, type
sntp update-interval
interval,
and press
Enter
.
Configures the SNTP unicast client to query the server at the defined intervals.
Defining the SNTP Unicast Update Interval: Example
The following example shows how to set the SNTP update interval for 100 seconds.
SCE(config)# sntp update-interval 100
How to Display SNTP Information
Step 1
From the SCE> prompt, type
show sntp
,
and press
Enter
.
Displays the configuration of both the SNTP unicast client and the SNTP multicast client.