9-14
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 9 Managing Subscribers
Creating Anonymous Groups
Creating Anonymous Groups
You can create anonymous groups in two ways:
•
Define the group, along with the related IP address range, using the
subscriber anonymous-group
command. The SCE platform then generates anonymous subscribers for that group when it detects
traffic with an IP address that is in the specified IP range.
•
Create the group by importing anonymous groups from a csv file.
Groups can also be exported to a csv file.
For information on deleting anonymous groups, see
How to Remove a Specific Anonymous Subscriber
Group, page 9-12
and
How to Remove All Anonymous Subscriber Groups, page 9-12
.
Defining Anonymous Groups
Use this command to define an anonymous group, assigning the following to the group created:
•
group name
•
range of IP addresses
•
subscriber template to be assigned to all subscribers within that IP range (optional)
How to Define an Anonymous Group
Options
The following options are available:
•
group-name
— name to be assigned to the anonymous group.
•
range
— range of IP addresses that defines this group.
•
template
— number of the subscriber template to assign to all subscribers in this group.
Default = 0
Step 1
From the SCE(config if)# prompt, type
subscriber anonymous-group name
group-name
ip-range
range
[template
template
]
and press
Enter
.
If no template is specified, the default template is applied to all subscribers in this group.
Importing and Exporting Anonymous Groups
•
How to Import Anonymous Groups, page 9-15
•
How to Export Anonymous Groups, page 9-15