![background image](http://html.mh-extra.com/html/cisco/sce-1000-and/sce-1000-and_configuration-manual_64496080.webp)
4-2
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 4 Utilities
The Setup Command
admin password
Admin level password
Character string from 4-100 characters beginning with an alpha
character.
.root password
Root level password.
Character string from 4-100 characters beginning with an alpha
character.
password encryption status
Enable or disable password encryption?
Time Settings
time zone name and offset
Standard time zone abbreviation and minutes offset from UTC.
local time and date
Current local time and date. Use the format:
00:00:00 1 January 2007
SNTP Configuration
broadcast client status
Sets the status of the SNTP broadcast client.
If enabled, the SCE will synchronize its local time with updates
received from SNTP broadcast servers.
unicast query interval
Interval in seconds between unicast requests for update (64 – 1024)
unicast server IP address
IP address of the SNTP unicast server.
DNS Configuration
DNS lookup status
Enable or disable IP DNS-based hostname translation.
default domain name
Default domain name to be used for completing unqualified host
names
IP address
IP address of domain name server. (maximum of three servers)
RDR Formatter Destination Configuration
IP address
IP address of the RDR-formatter destination
TCP port number
TCP port number of the RDR-formatter destination
Access Control Lists
Access Control List number
How many ACLs will be necessary? What IP addresses will be
permitted/denied access for each management interface? You may
want ACLs for the following:
•
Any IP access
•
Telnet access
•
SNMP GET access
•
SNMP SET access
list entries (maximum 20 per list) IP address, and whether permitted or denied access.
IP access ACL
ID number of the ACL controlling IP access.
telnet ACL
ID number of the ACL controlling telnet access.
SNMP Configuration
Table 4-1
Setup Command Parameters (continued)
Parameter
Definition