![background image](http://html.mh-extra.com/html/cisco/sce-1000-and/sce-1000-and_configuration-manual_64496337.webp)
12-23
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 12 Value Added Services (VAS) Traffic Forwarding
Configuring VAS Traffic Forwarding
Options
The following options are available:
•
number
— The ID number of the VAS server for which to enable or disable the health check
•
Enable/disable
— Enable or disable VAS server health check
–
Default — Enable
•
UDP ports
— Specify the UDP ports to be used for the health check:
–
source portnumber
— health check source port number
–
destination portnumber
— health check destination port number
–
Default — <63140,63141>used for server #0 through <63154,63155>used for server #7.
How to Enable VAS Server Health Check
Step 1
From the SCE(config if)# prompt, type
VAS-traffic-forwarding VAS server-id
number
health-check
and press
Enter
.
How to Disable VAS Server Health Check
Step 1
From the SCE(config if)# prompt, type
no VAS-traffic-forwarding VAS server-id
number
health-check
and press
Enter
.
How to Define the UDP Ports to be Used for Health Check
Step 1
From the SCE(config if)# prompt, type
VAS-traffic-forwarding VAS server-id
number
health-check
UDP ports source
portnumber
destination
portnumber
and press
Enter
.
How to Remove the UDP Ports Configuration
Step 1
From the SCE(config if)# prompt, type
no VAS-traffic-forwarding VAS server-id
number
health-check UDP ports
and press
Enter
.
You can also use the default form of the command to remove the UDP port configuration.
VAS-traffic-forwarding VAS server-id
number
health-check UDP ports
How to Configure Pseudo IP Addresses for the Health Check Packets
•
About Pseudo IP Addresses, page 12-24
•
Options, page 12-24
•
How to Define the pseudo IP Address, page 12-24
•
How to Delete the pseudo IP Address, page 12-24