![background image](http://html.mh-extra.com/html/cisco/sce-1000-and/sce-1000-and_configuration-manual_64496157.webp)
5-63
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 5 Configuring the Management Interface and Security
Configuring Time Clocks and Time Zone
How to Define Recurring Daylight Saving Time Transitions
Step 1
From the SCE(config)# prompt, type
clock summer-time
zone
recurring
[week1 day1 month1 time1
week2 day2 month2 time2
[
offset
]] and press
Enter
.
Configures daylight saving time to start and stop on the specified days every year.
Defining Recurring Daylight Saving Time Transitions: Example
The following example shows how to configure recurring daylight saving time for a time zone designated
"DST" as follows:
•
Daylight saving time begins — 0:00 on the last Sunday of March.
•
Daylight saving time ends — 23:59 on the Saturday of fourth week of November.
•
Offset = 1 hour (default.
SCE(config)# clock summer-time DST recurring last Sunday March 00:00 4 Saturday November
23:59
How to Define Non-Recurring Daylight Saving Time Transitions
Step 1
From the SCE(config)# prompt, type
clock summer-time
zone
[
date1 month1 year1 time1 date2
month2 year2 time2
[
offset
]] and press
Enter
.
Enables privileged EXEC mode.
Defining Non-Recurring Daylight Saving Time Transitions: Example
The following example shows how to configure non-recurring daylight saving time for a time zone
designated "DST" as follows:
•
Daylight saving time begins — 0:00 on April 16, 2004.
•
Daylight saving time ends — 23:59 October 23, 2004.
•
Offset = 1 hour (default)
SCE(config)# clock summer-time DST April 16 2004 00:00 October 23 2004 23:59
How to Cancel the Daylight Saving Time Configuration
Step 1
From the SCE(config)# prompt, type
no clock summer-time
and press
Enter
.
Removes all daylight saving configuration.