![background image](http://html.mh-extra.com/html/cisco/sce-1000-and/sce-1000-and_configuration-manual_64496177.webp)
6-11
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 6 Configuring the Line Interface
Tunneling Protocols
Configuring the VLAN Environment: Example
The following example selects VLAN-based classification.
SCE(config if)#vlan symmetric classify
Configuring the MPLS Environment
Use this command to set the MPLS environment.
Note
For more information regarding the Cisco Service Control MPLS/VPN solution, see the "MPLS/VPN
Support " chapter.
•
Options, page 6-11
•
Configuring the MPLS Environment: Example, page 6-11
Options
The following options are available:
•
traffic-engineering skip
(default)—Use when all IP addresses are unique and MPLS labels are not
mandatory for routing.
•
VPN skip
—Use when all IP addresses are unique, but MPLS labels are mandatory for routing.
•
VPN auto-learn
—Use in an MPLS/VPN environment where auto-learning is required due to the
existence of private IP addresses and/or VPN based subscribers.
When this option is configured, both
ip-tunnel
and
VLAN
must be set to their default values.
Use the
VPN
keyword when the labels are mandatory in the traffic, otherwise use
traffic-engineering
(default).
Note that using the
VPN
value incurs a performance penalty.
The
MPLS VPN auto-learn
option is required in an MPLS/VPN environment.
Step 1
From the SCE(config if)# prompt, type
mpls {traffic-engineering skip|vpn skip|vpn auto-learn}
and
press
Enter
.
Specify the desired MPLS mode.
Configuring the MPLS Environment: Example
The following example selects the MPLS/VPN tunnel environment.
SCE(config if)#mpls vpn auto-learn