![background image](http://html.mh-extra.com/html/cisco/sce-1000-and/sce-1000-and_configuration-manual_64496408.webp)
14-12
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 14 Managing the SCMP
Configuring the SCMP
Adding an SCMP Peer Device
•
How to Define an SCMP Peer Device, page 14-12
•
Assigning the SCMP Peer Device to an Anonymous Group, page 14-13
Adding an SCMP peer device is a two-step process:
1.
Define the device, configuring the following parameters:
–
device name
–
RADIUS host
–
RADIUS shared secret authorization
–
port number (optional)
–
accounting port number (optional)
2.
Associate the device with one or more unmapped anonymous groups.
How to Define an SCMP Peer Device
Options
The following options are available:
•
peer_device_name
— User-assigned name of the SCMP peer device
•
radius_hostname
— IP address or host-name of the RADIUS host (if a host-name is used, it must
be valid at time of the configuration)
•
shared_secret
— RADIUS shared secret
•
auth-portnumber
(optional) — authorization port number
•
acct-portnumber
(optional) — accounting port number
Defaults:
•
auth-port# — 1812
•
acct-port# — 1813
Step 1
From the SCE(config)# prompt, type
scmp name
peer_device_name
radius
radius_hostname
secret
shared_secret
[auth-port
auth-portnumber
acct-port
acct-portnumber
]
and press
Enter
.