![background image](http://html.mh-extra.com/html/cisco/sce-1000-and/sce-1000-and_configuration-manual_64496197.webp)
7-3
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 7 Configuring the Connection
Monitoring the Connection Mode and Related Parameters
•
Priority
— This parameter defines which is the primary SCE platform. It is applicable only in a two
SCE platform topology.
Possible values are ‘primary’ and ‘secondary’
Not applicable to single SCE platform topologies.
•
On-failure
— This parameter determines whether the system cuts the traffic (cutoff) or bypasses it
(bypass) when the SCE platform either has failed or is booting.
Default —
bypass
Not applicable to receive-only topologies.
Note
Do not change the connection mode unless the physical installation has been changed.
Step 1
From the SCE(config if)# prompt, type
connection-mode (inline | receive-only | inline-cascade |
receive-only-cascade) [sce-id
(
0|1) priority (primary|secondary)] on-failure (bypass|cutoff)
and
press
Enter
.
Configuring the Connection Mode: Examples
Example 1
This example defines the primary device in a two-SCE platform redundant, inline topology. Link 0 is
connected to this device, and the link mode on failure is bypass.
SCE(config if)# connection-mode inline-cascade sce-id 0 priority primary on-failure
bypass
Example 2
This example defines a single-SCE platform, dual link, receive-only topology. The link mode on-failure,
physically-connected-links, and priority options are not applicable.
SCE(config if)# connection-mode receive-only
Monitoring the Connection Mode and Related Parameters
How to View the Current Connection Mode
Step 1
From the SCE> prompt, type
show interface linecard 0 connection-mode
and press
Enter
.
Displays the connection mode configuration.