![background image](http://html.mh-extra.com/html/cisco/sce-1000-and/sce-1000-and_configuration-manual_64496006.webp)
Contents
iv
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Generating a File for Technical Support
4-11
Generating a File for Technical Support: Example
4-11
Flow Capture
4-12
Limitations
4-12
The Flow Capture Process
4-12
Configuring a Flow Capture Traffic Rule
4-13
Configuring the Flow Capture Settings
4-13
Performing the Flow Capture
4-14
Monitoring the Flow Capture
4-15
C H A P T E R
5
Configuring the Management Interface and Security
5-1
Introduction
5-1
About Management Interface and Security
5-2
Configuring the Management Ports
5-2
Entering Management Interface Configuration Mode
5-3
Configuring the Management Port Physical Parameters
5-3
Setting the IP Address and Subnet Mask of the Management Interface
5-4
Options
5-4
Setting the IP Address and Subnet Mask of the Management Interface: Example
5-4
Configuring the Management Interface Speed and Duplex Parameters
5-5
Interface State Relationship to Speed and Duplex
5-5
How to Configure the Speed of the Management Interface
5-5
How to Configure the Duplex Operation of the Management Interface
5-6
Specifying the Active Management Port
5-6
Options
5-7
Specifying the Active Management Port: Example
5-7
Configuring Management Interface Redundancy
5-7
About Management Port Redundancy
5-7
How to Configure the Management Ports for Redundancy
5-8
Configuring the Fail-Over Mode
5-8
Options
5-8
How to Enable Automatic Fail-Over Mode
5-8
How to Disable Automatic Fail-Over Mode
5-9
Configuring Management Interface Security
5-9
Configuring the IP Fragment Filter
5-9
Options
5-9
How to Enable the IP Fragment Filter
5-10
How to Disable the IP Fragment Filter
5-10
Configuring the Permitted and Not-permitted IP Address Monitor
5-10