![background image](http://html.mh-extra.com/html/cisco/sce-1000-and/sce-1000-and_configuration-manual_64496109.webp)
5-15
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 5 Configuring the Management Interface and Security
Configuring the Available Interfaces
1.
For complete details on server configuration, refer to the appropriate configuration guide for the
particular server that you will be using.
2.
Configure the SCE client to work with server:
–
hostname of the server
–
port number
–
shared encryption key (the configured encryption key must match the encryption key configured
on the server in order for the client and server to communicate.)
3.
(Optional) Configure the local database, if used.
–
add new users
If the local database and are both configured, it is recommended to configure the same
user names in both and the local database. This will allow the users to access the SCE
platform in case of server failure.
Note
If is used as the login method, the username is used automatically in the enable
command. Therefore, it is important to configure the same usernames in both and the local
database so that the enable command can recognize this username.
–
specify the password
–
define the privilege level
4.
Configure the authentication methods on the SCE platform.
–
login authentication methods
–
privilege level authorization methods
5.
Review the configuration.
Use the "
show running-config
" command to view the configuration.
Configuring the SCE Platform Client
•
How to Add a new Server Host, page 5-16
•
How to Remove a Server Host, page 5-17
•
How to Configure the Global Default Key, page 5-17
•
How to Configure the Global Default Timeout, page 5-18