![background image](http://html.mh-extra.com/html/cisco/sce-1000-and/sce-1000-and_configuration-manual_64496412.webp)
14-16
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 14 Managing the SCMP
Monitoring the SCMP Environment
Options
The following options are available:
•
times
— The maximum number of times the RADIUS client can try unsuccessfully to send a
message.
–
Default = 3
•
timeout
(optional) — Timeout interval for retransmitting a message, in seconds
–
Default = 1 second
Step 1
From the SCE(config)# prompt, type
ip radius-client retry limit times [timeout
timeout
]
and press
Enter
.
Monitoring the SCMP Environment
•
Monitoring the SCMP, page 14-16
•
Monitoring the RADIUS Client, page 14-18
You can monitor the following components of the SCMP environment:
•
SCMP
•
RADIUS client
Monitoring the SCMP
•
Options, page 14-16
•
How to display the general SCMP configuration, page 14-17
•
How to display the configuration all currently defined SCMP peer devices, page 14-17
•
How to display the configuration for a specified SCMP peer device, page 14-17
•
How to display the statistics for all SCMP peer devices, page 14-17
•
How to display the statistics for a specified SCMP peer device, page 14-18
Use the following commands to monitor the SCMP. These commands provide the following information:
•
General SCMP configuration
•
Configuration of all currently defined SCMP peer devices.
•
Configuration of a specified SCMP peer device.
•
Statistics for either all SCMP peer devices or a specified SCMP peer device.
Options
The following options are available:
•
device-name
— The name of the specific SCMP peer device for which to display the configuration
or statistics.