7-4
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 7 Configuring the Connection
Monitoring the Connection Mode and Related Parameters
Monitoring the Connection Mode: Examples
The following example shows the current configuration of the connection mode for a single platform.
SCE>enable 5
Password:<cisco>
SCE>
show interface linecard 0 connection-mode
Slot 0 connection mode
Connection mode is inline
slot failure mode is cutoff
Redundancy status is standalone
SCE>
The following example shows the current configuration of the connection mode for a cascaded system.
SCE>enable 5
Password:<cisco>
SCE>
show interface linecard 0 connection-mode
Slot 0 connection mode
Connection mode is inline-cascade
slot 0 sce-id is 1
slot 0 is secondary
slot 0 is connected to peer
slot failure mode is bypass
Redundancy status is active
SCE>
How to View the SCE-ID
Step 1
From the SCE> prompt, type
show interface linecard 0 sce-id
and press
Enter
.
Viewing the SCE-ID: Example
SCE>enable 5
Password:<cisco>
SCE>
show interface linecard 0 sce-id
slot 0 sce-id is 1
How to View the Current Redundancy Status of the SCE Platform
Step 1
From the SCE> prompt, type
show interface linecard 0 cascade redundancy-status
and press
Enter
.
Viewing the Current Redundancy Status of the SCE Platform: Example
The following example shows typical output of this command.
SCE>enable 5
Password:<cisco>
SCE>
show interface linecard 0 cascade redundancy-status
Redundancy status is active