![background image](http://html.mh-extra.com/html/cisco/sce-1000-and/sce-1000-and_configuration-manual_64496267.webp)
9-39
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 9 Managing Subscribers
Configuring Subscriber Aging
How to Enable Aging for Introduced Subscribers
Note
Introduced subscriber aging is not supported when using VPN-based subscribers
Step 1
From the SCE(config if)# prompt, type
subscriber aging introduced
and press
Enter
.
How to Disable Aging for Anonymous Group Subscribers
Step 1
From the SCE(config if)# prompt, type
no subscriber aging anonymous
and press
Enter
.
How to Disable Aging for Introduced Subscribers
Step 1
From the SCE(config if)# prompt, type
no subscriber aging introduced
and press
Enter
.
How to Set the Aging Timeout Period for Anonymous Group Subscribers
Options
The following option is available:
•
aging-time
— the time interval, in minutes, after which an inactive subscriber sill be aged.
Step 1
From the SCE(config if)# prompt, type
no subscriber aging anonymous timeout
aging-time
and press
Enter
.