C H A P T E R
8-1
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
8
Raw Data Formatting: The RDR Formatter and
NetFlow Exporting
Revised: June 15, 2009, OL-7827-12
Introduction
Cisco Service Control is able to deliver gathered reporting data to an external application for collecting,
aggregation, storage and processing over two protocols:
•
RDRv1: the Service Control proprietary export protocol
•
NetFlow V9: an industry standard export protocol
These two protocols can be used simultaneously in the same deployment. However, any specific
destination (external collector) to which data is sent can be configured with only one protocol.
•
Information About the RDR Formatter and NetFlow Exporting Support, page 8-1
•
Configuring Data Destinations and Categories, page 8-6
•
Configuring the RDR Formatter, page 8-13
•
Configuring the NetFlow Exporting Support, page 8-14
•
Configuring Dynamic Mapping of RDRs to Categories, page 8-15
•
Displaying Data Destination Configuration and Statistics, page 8-17
•
Disabling the Linecard from Sending RDRs, page 8-19
Information About the RDR Formatter and NetFlow Exporting
Support
•
The RDR Formatter, page 8-2
•
NetFlow, page 8-2
•
Data Destinations, page 8-3