12-28
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 12 Value Added Services (VAS) Traffic Forwarding
Monitoring VAS Traffic Forwarding
Monitoring VAS Traffic Forwarding
•
How to Display Global VAS Status and Configuration, page 12-28
•
How to Display Operational and Configuration Information for a Specific VAS Server Group,
page 12-29
•
How to Display Operational and Configuration Information for All VAS Server Groups, page 12-29
•
How to Display Operational and Configuration Information for a Specific VAS Server, page 12-29
•
How to Display Operational and Configuration Information for All VAS Servers, page 12-30
•
How to Display the VAS Servers Used by a Specified Subscriber, page 12-30
•
How to Display Health Check Counters for a Specified VAS Server, page 12-30
•
How to Display Health Check Counters for All VAS Servers, page 12-31
•
How to Clear the Health Check Counters for a Specified VAS Server, page 12-31
•
How to Clear the Health Check Counters for All VAS Servers, page 12-31
•
How to Display Bandwidth per VAS Server and VAS Direction, page 12-31
Use these commands to display the following information for VAS configuration and operational status
summary.
•
Global VAS status summary — VAS mode, the traffic link used
•
VAS Server Groups information summary — operational status, number of configured servers,
number of current active servers.
This information may be displayed for a specific server group or all server groups
•
VAS servers information summary — operational status, Health Check operational status, number
of subscribers attached to this server.
This information may be displayed for a specific server or all servers
•
Bandwidth per VAS server and VAS direction (to VAS / from VAS)
•
VAS health check counters
Sample outputs are included.
How to Display Global VAS Status and Configuration
Step 1
From the SCE> prompt, type
show interface linecard 0 VAS-traffic-forwarding
and press
Enter
.
Example
SCE>show interface linecard 0 VAS-traffic-forwarding
VAS traffic forwarding is enabled
VAS traffic link configured: Link-1 actual: Link-1