![background image](http://html.mh-extra.com/html/cisco/sce-1000-and/sce-1000-and_configuration-manual_64496251.webp)
9-23
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 9 Managing Subscribers
Monitoring Subscribers
How to display subscribers with no mapping
Step 1
From the SCE> prompt, type
show interface linecard 0 subscriber mapping none
and press
Enter
.
How to display the number of subscribers that are mapped to a specified VLAN ID
Options
The following options are available:
•
VLAN-id
— VLAN ID to match
Step 1
From the SCE> prompt, type
show interface linecard 0 subscriber amount mapping VLAN-id
VLAN-id
and press
Enter
.
How to display the number of subscribers with no mapping
Step 1
From the SCE> prompt, type
show interface linecard 0 subscriber amount mapping none
and
press
Enter
.
Displaying Subscriber Information
•
How to display a listing of subscriber properties, page 9-24
•
How to display complete information for a specified subscriber, page 9-24
•
How to display values of subscriber properties for a specified subscriber, page 9-24
•
How to display mappings for a specified subscriber, page 9-25
•
How to display OS counters for a specified subscriber, page 9-25
You can display the following information about a specified subscriber:
•
values of the various subscriber properties
•
mappings (IP address, VLAN-ID or MPLS/VPN)
•
OS counters:
–
current number of flows
–
bandwidth