![background image](http://html.mh-extra.com/html/cisco/sce-1000-and/sce-1000-and_configuration-manual_64496159.webp)
5-65
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 5 Configuring the Management Interface and Security
Configure SNTP
How to Disable the SNTP Multicast Client
Step 1
From the SCE(config)# prompt, type
no sntp broadcast client
and press
Enter
.
Disables the SNTP multicast client. It will not accept any broadcast time updates.
How to Enable the SNTP Unicast Client
•
Options, page 5-65
•
Enabling SNTP Unicast Client: Example, page 5-65
Options
The following option is available:
•
ip-address
— the IP address of the SNTP unicast server.
Step 1
From the SCE(config)# prompt, type
sntp server ip-address
and press
Enter
Defines the SNTP unicast server so that SNTP client is able to query that server.
Enabling SNTP Unicast Client: Example
The following example shows how to enable an SNTP server at IP address 128.182.58.100.
SCE(config)# sntp server 128.182.58.100
How to Disable the SNTP Unicast Client
•
How to Disable the SNTP Unicast Client and Remove All Servers, page 5-65
•
How to Remove One SNTP Server, page 5-66
How to Disable the SNTP Unicast Client and Remove All Servers
Step 1
From the SCE(config)# prompt, type
no sntp server all
and press
Enter
.
Removes all SNTP unicast servers, preventing unicast SNTP query.