Boston Whaler 37 Justice Series, Руководство по эксплуатации и техническому обслуживанию

Страница: 153 / 214

5-19
Electrical Systems Section 5
Rigging
This boat has a rigging tube above the fuel tank and
below the oor to allow the user to run new wiring for
elect ronics. There is a pull co rd installed in the tube with
the ends bundled and tied at either end of the tube. The
ends are loca ted in the aft bilge, starboard upper co rner
of the mech anica l bulkh ead and inside the co nsole below
the fuel fill access plate.
There is also a c ord loca ted in the port frame of the
hardtop which terminates in the co nsole at one end and
the elect ronics box at the other.
Tie another piece of nylon co rd to the cu rrent acce ssory
wiring being run and use that for later runs.
T ransducer Mounting Area
B CGP has molded a speci al area into the hull of this boat
to acco
mmodate installation of a thru-hull transduce r
either by the fact ory or later by the end-user. This loca tion
ensures optimal transduce r performance and faci litates
installation given the nature of the B oston Whaler foam
co re co nstruct ion.
TRANSDUCER MOUNTING AREA