Avocent DSView 3, Инструкция по установке и эксплуатации

Страница: 37 / 384

Chapter 1: Product Overview 19
If the third party application does not automatically launch a command window, check the
Launch in Command Window checkbox.
5. Click Save .
Specifying a user certificate
This property may be changed only for internal authentication users. See DSView 3 software
internal authentication service on page 61.
A user may specify a certificate if the administrator has allowed it; see the procedure below. If the
system certificate policy is enabled for user certificates (see
System certificate policy and trust
store on page 27), the user certificate used at login must meet the policy requirements.
As an alternative, the administrator may specify the certificate in the user account properties. See
User certificates on page 185.
To enable user settable certificates:
NOTE: Only DSView 3 software administrators may access this procedure.
1. Click the System tab.
2. Click User Credential Properties in the side navigation bar.
3. Check the Allow user to set own certificate checkbox.
4. Click Save .
To specify a user certificate:
NOTE: A user may access this procedure only if a DSView 3 software administrator has allowed it.
1. Click the Profile tab. Preferences will automatically be selected in the top navigation bar.
2. Click Credentials in the side navigation bar, then click Certificate .
3. Type the path and name of the certificate or browse to the certificate location.
4. Click Save . An updated Certificate window will open.
Specifying an SSH key
A user may specify an SSH key if the administrator has allowed it.
As an alternative to this method, the administrator may specify the SSH key in the user account
properties. See
User SSH key on page 185.
To enable user settable SSH keys:
NOTE: Only DSView 3 software administrators may access this procedure.
1. Click the System tab.
2. Click User Credential Properties in the side navigation bar.
3. Check the Allow user to set own SSH key checkbox.