Avocent DSView 3, Инструкция по установке и эксплуатации

Страница: 308 / 384

290 DSView 3 Software Installer/User Guide
4. Click Run Now . The icon to the left of the task name will change to the running icon and the
status of the task will change to Running.
Displaying task results
The Task Results window displays the status of the most current run of tasks, including successful
and unsuccessful runs and information on each run.
The following fields display in the Task Results window for the Configure SNMP trap settings on
appliance, Control power of target devices, Migrate DSView 2.X Units, Send IPMI chassis control
command to target devices and Upgrade firmware of selected appliances of the same type tasks:
• Name - Names of the DS1800 digital switch, DSI5100, CPS or CCM appliance, DSR switch or
IPMI target device on which the task is running or has been run
• Start Time - Exact time at which each task run occurred
• Duration - Date and time of the task run
• Status - Result of the task run
To display the results of a task:
1. Click the System tab.
2. Click Tasks in the top navigation bar. The Tasks window will open.
3. Click the name of the task. The Task Results window will display, containing information
about the task.
Deleting tasks
NOTE: Remote tasks, which are scheduled on another DSView 3 software server, may not be deleted from the
DSView 3 software server to which you are logged in. To delete a remote task, you must log in to the DSView 3
software server on which the task was created.
To delete a task:
1. Click the System tab.
2. Click Tasks in the top navigation bar. The Tasks window will open.
3. Click the checkbox to the left of the task(s) you wish to delete. To delete all tasks on the page,
click the checkbox to the left of Name column at the top of the list.
4. Click Delete . A confirmation dialog box will appear.
5. Confirm or cancel the deletion.
Changing tasks
NOTE: Remote tasks, which are scheduled on another DSView 3 software server, may not be modified from the
DSView 3 software server to which you are logged in. To change a remote task, you must log in to the DSView 3
software server on which the task was created.