Avocent DSView 3, Инструкция по установке и эксплуатации

Страница: 181 / 384

Chapter 4: Managing Units 163
5. If a login will not be required to access the file location, disable the Login required to access
shared drive location checkbox.
If a login will be required to access the file location:
a. Enable the Login required to access shared drive location checkbox.
b. In the Username field, enter the username (up to 256 characters) to access the file location.
c. In the Password field, enter the password (up to 64 characters).
d. Repeat the password in the Confirm Password field.
6. Click Save .
Enabling and disabling data logging on units
Data logging is enabled and disabled per connection. Depending on the appliance type, you may
enable or disable data logging on target device connections, appliance connections or both.
You must have the Configure Unit Settings access right to enable/disable data logging.
To enable or disable data logging on a unit:
NOTE: The exact name and content of configuration pages are specific to the appliance type; see the
appropriate documentation.
1. In a Units View window containing the appliance or target device (see Accessing Units View
windows on page 88), click on the unit name.
2. In the side navigation bar, click Data Logging , then click Configure . The Data Logging
Configuration window for that unit will open. The display lists all connections. The Status
field may contain the following values:
• Enabled - Data logging is enabled in the appliance for the corresponding port connection
and a data log license has been allocated for it (data logging for a direct session to an
appliance does not require or use a license).
• Disabled - Data logging is disabled in the appliance for the corresponding port.
• Unlicensed - Data logging is enabled in the appliance for the corresponding port
connection, but there is no data log license allocated for it.
3. To enable data logging on one or more connections:
a. Click the checkbox next to the connection name(s). To select all connections on the page,
click the checkbox at the top of the list.
b. Click Enable . If sufficient data log licenses are available, logging will be enabled on the
selected connections and the Status field will indicate Enabled. If insufficient licenses are
available, a warning will be displayed, and the Status field will indicate either Enabled or
Unlicensed.
4. To disable data logging on one or more connections:
a. Click the checkbox next to the connection name(s). To select all connections on the page,
click the checkbox at the top of the list.