Avocent DSView 3, Инструкция по установке и эксплуатации

Страница: 125 / 384

Chapter 4: Managing Units 107
• Power device socket - see Power device sockets on page 145
• Cascade switch - see DSR Switch and Cascade Switch Settings on page 128
• Target device - see Target Device Settings on page 125
To enable or disable automatic name pull:
1. Click the System tab.
2. Click Global Properties in the top navigation bar.
3. Click Unit Synchronization in the side navigation bar, then click Auto Name Pull .
4. The Automatic Name Pull Properties window will open. To enable automatic name pull,
enable the
Pull Names from appliances to DSView automatically checkbox.
To disable automatic name pull, disable the Pull Names from appliances to DSView
automatically checkbox and go to the last step.
5. For target devices that have multiple connections, you may set the connection type priority by
using the arrows to re-order the available types. This order determines which target device
name will be pulled from one or more appliances to update the DSView 3 software database.
The name will be pulled from only one appliance.
6. Click Save .
Manual name push
You may initiate a manual name push from a Units View window (see below) and from the
following windows:
• Appliance Serial Ports window - see CCM/CPS Appliance Port Settings on page 132
• Target Devices window - see Target Device Settings on page 125
• Power Device window - see Power devices on page 142
• Power Device Sockets window - see Power device sockets on page 145
• Appliance cascade switches window - see DSR Switch and Cascade Switch Settings on
page 128
To initiate a name push operation from a Units View window:
1. In a Units View window (see Accessing Units View windows on page 88), click the checkboxes
next to one or more units. To select all units on the page, click the checkbox to the left of the
heading at the top of the list.
2. Click Operations , then select Push Names to Appliance from the drop-down menu.
3. The Multiple Unit Operations window will open, containing a link to the Operation Results
window; see
Multiple unit operations from a Units View window on page 92.