Avocent DSView 3, Инструкция по установке и эксплуатации

Страница: 126 / 384

108 DSView 3 Software Installer/User Guide
Manual name pull
Table 4.5 describes what occurs when a name pull operation is initiated.
You may initiate a manual name pull from a Units View window and from the following windows:
• Appliance Serial Ports window - see CCM/CPS Appliance Port Settings on page 132
• Target Devices window - see Target Device Settings on page 125
• Power Device window - see Power devices on page 142
• Power Device Sockets window - see Power device sockets on page 145
• Appliance cascade switches window - see DSR Switch and Cascade Switch Settings on
page 128
To initiate a name pull operation from a Units View window:
1. In a Units View window (see Accessing Units View windows on page 88), click the checkboxes
next to one or more units. To select all units on the page, click the checkbox to the left of the
heading at the top of the list.
2. Click Operations , then select Pull Names from Appliance from the drop-down menu.
3. The Multiple Unit Operations window will open, containing a link to the Operation Results
window; see
Multiple unit operations from a Units View window on page 92.
Table 4.5: Manual Name Pull Operation Effects
When pull is initiated
for one or more:
The effect is
Appliance serial ports
The target device name will be pulled from the appliance to update the target device
name in the DSView 3 software database.
Power devices
The power device name will be pulled from the appliance to update the power device
name in the DSView 3 software database.
Power device sockets
The target device name will be pulled from the appliance to update the target device
name in the DSView 3 software database.
Target devices
The target device name will be pulled from the appliance to update the target device
name in the DSView 3 software database.
Cascade switches
The cascade switch name will be pulled from the appliance to update the cascade
switch name in the DSView 3 software database.
If the cascade switch in the DSView 3 software database has multiple appliance
connections to the same appliance (a multiuser cascade switch), the cascade switch
name will be pulled form the appliance connection with the lowest port number to
update the cascade switch in the DSView 3 software database. Multiuser cascade
switches are treated as separate cascade switches by the managed appliance.