Avocent DSView 3, Инструкция по установке и эксплуатации

Страница: 303 / 384

Chapter 9: Using Tools 285
appliance you wish to migrate. For example, if you wish to migrate DSR1021, DSR2010 and
DSR2010 switches and CPS1610 appliances, you must create four Migrate Units tasks.
9. The Select Appliances window will open. The Available Appliances list will contain only units
with a status or Migration Needed that match the selected type found in the unit group
specified in the previous step. Select one or more managed appliance to migrate from the
Available Appliances list, then Click
Add . The switches or appliances will be moved to the
Appliances to Configure list.
10. Click Next .
11. The Select Options for Migration window will open. If you want the managed appliances you
are migrating to be accessible only by this DSView 3 software server, enable the Enable
secure mode checkbox. If you want the managed appliances you are migrating to be accessible
by any DSView 3 software system, disable the Enable secure mode checkbox. Click Next .
12. The Select Firmware Files for Migration window will open.
a. Type the host name or the address of the TFTP server, in standard dot notation
(xxx.xxx.xxx.xxx) containing the DS1800 digital switch, CPS appliance or DSR switch
firmware files required for migration to DSView 3 management software compatibility.
b. Type the name of each firmware image.
c. Click Next .
13. The Completed Successful window will open. Click Finish . The Tasks window will open. You
may display the current progress of the migration task by clicking on the name of the task.
14. Repeat the preceding steps for each type of managed appliance that you wish to migrate.
Units successfully migrated into the DSView 3 software system will appear in Units View
windows and the Migration Status field for these units will indicate Migration Completed.
Task: Migrating AVWorks software CCM appliances
This task updates any CCM appliances within the unit group, or any CCM appliances using
firmware compatible with the AVWorks software to firmware that is compatible with the DSView
3 software.
Before an AVWorks software CCM appliance can be migrated, you must ensure that it is Flashed
with bootstrap and application images at version 2.2 or higher. This procedure is described in the
CCM Appliance Migration document, which is available on the Avocent web site.
The AVWorks software CCM appliance must be added to the DSView 3 software system before it
is migrated (see
Adding Units on page 95). When you add the appliance, you will be alerted that it
must be migrated, along with a link named Add Migration Task, which will take you to the Add
Task Wizard.
A CCM appliance that has been migrated to DSView 3 management software compatible firmware
may be returned to AVWorks software compatibility. See the CCM Installer/User Guide for
more information.