Avocent DSView 3, Инструкция по установке и эксплуатации

Страница: 162 / 384

144 DSView 3 Software Installer/User Guide
c. Click Next .
5. A Completed Successful or Completed Unsuccessful window will open, indicating the results
of the addition or removal. Click
Finish .
To change power device settings:
1. In a Units View window containing appliances (see Accessing Units View windows on
page 88), click on the appliance name.
2. Click Appliance Settings in the side navigation bar, click Ports and then Power device in the
side navigation bar. The Power Devices Attached to Appliance window will open. (For DSR
switches that have two SPC ports, one row will appear for each power device.)
3. Click on the name of a power device. The Power Device Settings window will open.
Some fields are read-only. For fields that can be modified, enter or select new values. (If you
change the appliance name and the automatic name pull feature is enabled, see
Automatic
name pull on page 106 for the effect.)
4. Click Save and then click Close . The Power Devices Attached to Appliances window
will open.
5. Click Close . The Units View window will open.
Upgrading the firmware of a Cyclades power device
You may upgrade the firmware of a Cyclades power device attached to a DSR switch. There are
two ways to do this:
• From a Unit Overview window, using the Upgrade Firmware wizard - see Upgrading
firmware on page 273.
• Using the Task wizard - see Task: Updating the firmware of an appliance type on page 288.
• In the Select Task to Add window, select Upgrade firmware of selected units .
• In the Select Unit Type window, you may select by product family (Cyclades Power
Devices) or unit type (specific power device types)
If multiple power devices are installed in a daisy chain configuration, the most remote power
device will be upgraded first.
Power device input feed
The ability to display and change power device input feed information is currently supported on
Avocent SPC and Server Technology power devices.
To display power device input feed information:
1. In a Units View window containing appliances (see Accessing Units View windows on
page 88), click on the appliance name.
2. Click Appliance Settings in the side navigation bar, click Ports and then Power device in the
side navigation bar. The Power Devices Attached to Appliance window will open. (For DSR
switches that have two SPC ports, one row will appear for each power device.)