Avocent DSView 3, Инструкция по установке и эксплуатации

Страница: 36 / 384

18 DSView 3 Software Installer/User Guide
Changing your password
When the DSView 3 software internal authentication service is used, user accounts will indicate if
users are allowed to change their password; see
User account restrictions and expiration settings
on page 186.
By default, passwords must contain at least three characters and will never expire. A different
minimum character length and an expiration date may be configured; see
DSView 3 software
internal authentication service on page 61.
To change your password:
1. Click the Profile tab.
2. Click Preferences in the top navigation bar.
3. Click Change Password in the side navigation bar. The Change Password window will open.
4. Type your current password.
5. Type and confirm the new password.
6. Click Save .
Choosing the serial session application
You may specify the application to be used for serial sessions to target devices.
• DSView 3 software Telnet Viewer (Avocent Session Viewer)
• Win32 PuTTY Telnet/SSH application
• Third party application
NOTE: If you use a third party Telnet application, the first time you attempt to launch a session, you will be
prompted to confirm the use of that application. If you do not confirm the use of that application, the session will
not be launched.
To specify the serial session application:
1. Click the Profile tab.
2. Click Applications in the side navigation bar.
3. Check the checkbox for the application you want to use for serial sessions.
4. If you check 3rd Party Application , enter the path and executable name of the application
(maximum 256 characters) in the Serial Application field.
Specify any of the following parameters (up to 128 characters) in the Command Line
Arguments field. When the serial session is launched, the actual values will be substituted.
%ADDRESS% - The IP address will be substituted.
%PORT% - The port number will be substituted.
%TNAME% - The target name will be substituted.