Ametek 10001i, Руководство пользователя

Страница: 302 / 341

User Manual
288 i Series / iX Series
9.8.2.13 704 Option Related Error Messages
The CIGui32 program will monitor the power source on a regular basis for any run time errors. If
an error is reported by the power source, any test step execution will be aborted. Possible errors
and error sources are:
No Description Potential cause
2 Current Limit Fault EUT may require more current than the programmed current limit
setting. This is possible on constant power loads during reduced
voltage (low line) type test steps. If the power source is set to
Constant Voltage (CV) mode, the output will trip off when the
current limit is exceeded and a Current Limit fault is generated. In
Constant Current (CC) mode, the output voltage will be reduced
to reduce the current to the set limit. In this case, no error
message will be generated.
-113 Undefined Header Generally caused by a communication problem between the PC
and the power source.
If the RS232 interface is used and these problems persist, try
using the GPIB interface instead. (Requires National Instruments
GPIB controller).
15 Slew exceeds dwell The power source transient system was programmed to slew to a
voltage and/or frequency value that would take longer to
accomplish than the slew time set. This error can result in single
step mode if the steps are executed out of order or one or more
steps are skipped. The voltage/frequency values may no longer
line up. Try running the test from the first step.
16 Illegal during transient A transient step is still in progress. Try using the Abort button to
abort any test in progress. If other CIGui32 screens other than the
Main GUI screen are open, they may have initiated a transient,
which conflicts with the 704 option. Try closing all other CIGui32
windows.
Great efforts have been made to check all test sequence files provided as part of the
–704
option. However, due to the breadth and complexity of the 704 database, an occasional error
may occur while using these files. If an error cannot be resolved, turn on the CIGui32 bus
monitor window and rerun the test that yields the error and save the bus trace to a text file using
the File, Save All menu in the bus monitor window. This file can be emailed to
support@calinst.com along with a description of the error.
Furthermore, test files were developed making reasonable assumptions concerning the intent of
the MIL-STD-704 directive. The user is free to modify, edit, revise or otherwise update any of
these tests to match his/her own requirements. In this case, we recommend you copy the
supplied MS704_RevF subdirectory and use this copy to make modifications to. This will
preserve the original data provided.