Altigen MaxACD Administrator Скачать руководство пользователя страница 73

Страница: 73 / 261

Creating Distribution Lists

MaxACD Administrator Manual 63

Figure 6-2. Voice Mail Configuration, Voice Mail Distribution List tab

Defining a Distribution List

1. On the Voice Mail Distribution List tab, select an ID (00 – 99) in the

System

Distribution List ID

drop-down list.

The list name, if any, now appears in the

Name

box; the members of the list are

now displayed in the

Member

box, and other available extensions are displayed in

the

Non-Member

box.

2. To give the list a name or change the existing name, type a descriptive name into

the

Name

box.

3. To

add

a member, select the name(s) in the

Non-Member

list and click the

Add

button to move it to the

Member

list.

remove

a member, select the name(s) in the

Member

list and click the

Remove

button to move it to the

Non-Member

list.

You can select multiple names by using

Shift

-click or

Ctrl

-click.

4. Click

Apply

to save your changes, or click

to save and close the Voice Mail

Configuration window.

Содержание MaxACD Administrator






































































































































































































































































Результаты поиска

Содержание MaxACD Administrator

Отзывы:

Altigen MaxACD Administrator, Руководство пользователя, Страница: 73 / 261

Результаты поиска

Содержание MaxACD Administrator

Отзывы: