Altigen MaxACD Administrator Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 261

Altigen MaxACD Administrator Скачать руководство пользователя страница 2

WARNING!

Toll fraud is committed when individuals unlawfully gain access to customer

telecommunication systems. This is a criminal offense. Currently, we do not know of any
telecommunications system that is immune to this type of criminal activity. AltiGen Communications, Inc.
will not accept liability for any damages, including long distance charges, which result from unauthorized
and/or unlawful use. Although AltiGen Communications, Inc. has designed security features into its
products, it is your sole responsibility to use the security features and to establish security practices
within your company, including training, security awareness, and call auditing.

NOTICE

: While every effort has been made to ensure accuracy, AltiGen Communications, Inc., will not

be liable for technical or editorial errors or omissions contained within the documentation. The
information contained in this documentation is subject to change without notice.
This documentation may be used only in accordance with the terms of the AltiGen Communications, Inc.,
License Agreement.

MaxACD for Lync, MaxACD Administrator, MaxAgent, MaxAgent for Lync, MaxSupervisor, MaxReports,
VRManager, and Enterprise Manager are trademarks or registered trademarks of AltiGen
Communications, Inc. All other brand names mentioned are trademarks or registered trademarks of their
respective manufacturers.
AltiGen's products are protected under one or more of the following U.S. patents, with other U.S. patents
pending: 6532230; 6192344; 6292549; 6493439; 6909780; 6738465; 6754202; 6766006; 6928078;
6909709; 6956848; 7058047; 7013007; 7027578; 7280649; 7308092.

AltiGen Communications, Inc.
410 East Plumeria Dr.
San Jose, CA 95134
Telephone: 888-AltiGen (258-4436)
Fax: 408-597-9020
E-mail: [email protected]
Web site: www.altigen.com

Copyright © AltiGen Communications, Inc. 2011. All rights reserved.

«
1
2
3
4
...
»

Содержание MaxACD Administrator






































































































































































































































































Отзывы:

Нет отзывов