Altigen MaxACD Administrator Скачать руководство пользователя страница 179

Страница: 179 / 261

Setting Message Notification Options

MaxACD Administrator Manual 169

Voice Mail Access Option

To allow agents of a workgroup to access the group’s voice mail in MaxAgent
(MaxAgent’s

WG Voicemail

tab), select the group and check

Enable agents to access

voice mailbox of workgroup

Setting Message Notification Options

To set notification options on new incoming e-mail and voice messages, click the

Notification

tab in the Workgroup Configuration window, and select the workgroup

number from the

Group List

Figure 18-13. Workgroup Configuration, Notification tab

Individual users can also configure

Message Notification

within the AltiGen Voice Mail

System.

Note:

You can use

Apply to

to apply mailbox settings to one, some, or all workgroups.

See “Apply to Button” on page 154 for more information on using

Apply to

Setting the Message Types for Notification

Select the types of messages for which the workgroup user will be notified:

•

None

—selected, the user is

not

notified with a call regarding newly received

messages. Selecting this option does not prevent the user from getting message
waiting indicators or stutter dial tone when new messages are received.

•

Urgent Voice Messages Only

•

All Voice Messages

Please note that the system will start notification as soon as it enters non-business hours
under the following conditions:

•

Extension is set to notify

Urgent Voice Message Only

Содержание MaxACD Administrator






































































































































































































































































Результаты поиска

Содержание MaxACD Administrator

Отзывы:

Altigen MaxACD Administrator, Руководство пользователя, Страница: 179 / 261

Результаты поиска

Содержание MaxACD Administrator

Отзывы: