Akai MPC 60 Скачать руководство пользователя страница 99

Страница: 99 / 228

Section 4:Editing sequences

remove one 1/8 note from the end of a 4/4 bar, you would change its

time signature to 7/8.

To use this function, press the EDIT key and select option 9 from the

menu, and the following screen will appear:

First, select the bar number to be changed in the BAR field in the top line.

The existing time signature for that bar will be displayed in the FROM field

in the second line. Next, enter the time signature you wish to change to in

the TO field in the second line. To perform the change, press the

<Execute> soft key.

4.3.10 Changing the velocity or duration of a group of notes after
recording

This new feature allows you to globally modify the duration or velocity

values of a group of notes within a track. You may set them to a fixed

value, add or subtract an amount from them, or multiply them by a selected

percentage:

The fields are:

• The TRACK field:

This sets the track number which will be modified.

• The FROM and TO fields:

These 2 fields set the region within the track which will be

affected. These are both BAR.BEAT.CLOCK type fields.

The CHANGE field:

Содержание MPC 60




































































































































































































































Результаты поиска

Содержание MPC 60

Отзывы:

Akai MPC 60, Руководство оператора, Страница: 99 / 228

Результаты поиска

Содержание MPC 60

Отзывы: