Akai MPC 60 Скачать руководство пользователя страница 137

Страница: 137 / 228

Section 6: Sampling and editing sounds

137

drums because all four drums used that same sound, which is now

reversed.

• SOFT KEY 3- <Delete>:

This soft key allows you to delete the currently displayed sound from

memory. Pressing this soft key causes the following screen to appear:

Press <Execute> causes the sound to be deleted from memory. To

cancel this function, press <Cancel>.

NOTE: If a sound is currently loaded into more than one drum (for

example, a tom-tom is loaded into both TOMS and TOM4 at two different

tunings) and you press the <Execute> soft key, the drum will no longer be

assigned to this sound, but the sound will not be deleted from memory.

This is because the other drum is still using the sound. To delete the sound

from memory you must delete it from all other drums) which are using it.

• SOFT KEY 4- <Page 2>:

This soft key changes the screen to display the second page of

parameters, which control envelope and velocity parameters. The DRUM

and NAME fields, and the 4 soft keys, are the same as in page 1:

The fields are:

• The ATTACK(MSECS) field:

This field controls the amount of time over which the sound will rise from

silence to each note's velocity level, measured in milliseconds.

Содержание MPC 60




































































































































































































































Результаты поиска

Содержание MPC 60

Отзывы:

Akai MPC 60, Руководство оператора, Страница: 137 / 228

Результаты поиска

Содержание MPC 60

Отзывы: