Akai MPC 60 Скачать руководство пользователя страница 36

Страница: 36 / 228

3.3 The PLAY/RECORD screen - the main
operating mode of the MPC60

When the MPC60 is first powered on (with the STUDIO SET and

SYSTEM ALL disk in the drive), the following screen appears after the disk

has loaded:

Note: It is also possible to turn on the MPC60 without any disk in the

drive. In this case, no sounds or sequences will be loaded and the MPC60

may be used as a sequences only.

At this point, the device is in its standard operating mode, in which all

recording and playing of sequences is done. On this screen are presented

many data fields useful to the process of real-time recording. A detailed

description of each of the data fields and soft keys follows:

If this message appears, it means that the currently selected sequence is

ready to be recorded into. If the "(Record ready)" message is not displayed

and you want to record into the current sequence, press either the

RECORD or OVERDUB keys once, and the "(Record ready)" indicator

will be added to the title line, indicating that the current sequence is ready

to be recorded into. Remember that selecting a different sequence and then

reselecting the original one will remove the "(Record ready)" message.

• The SQNC field: This field displays the active sequence number, from 1 to

99. This is the sequence which will play when either the PLAY START or

PLAY keys is pressed. The MPC60 holds up to 99 sequences in memory at

one time.

Содержание MPC 60




































































































































































































































Результаты поиска

Содержание MPC 60

Отзывы:

Akai MPC 60, Руководство оператора, Страница: 36 / 228

Результаты поиска

Содержание MPC 60

Отзывы: