Akai MPC 60 Скачать руководство пользователя страница 17

Страница: 17 / 228

Section 2: The Basics

This is the PLAY/RECORD screen. It is the main operating mode of the

MPC60 and all playing and recording of sequences is done while this screen

is displayed. This screen will be discussed further in the section entitled

"Recording sequences'". If at any time while operating the MPC60 you are

confused and want to return to this mode, press the MAIN SCREEN key.

Note: There are three other disks included with the MPC60:

ROCK SET and SYSTEM ALL,

DRY SET and SYSTEM ALL, and

SYNTH SET and SYSTEM ALL.

These disks contain 3 additional sets of drum sounds, but contain the same

demonstration sequences. To hear the sounds on these disks, follow the

above instructions again, but use one of these disks instead. It is also

possible to load the files on these disks by using the DISK key, discussed

later in the section "Saving to and loading from disk".

Содержание MPC 60




































































































































































































































Результаты поиска

Содержание MPC 60

Отзывы:

Akai MPC 60, Руководство оператора, Страница: 17 / 228

Результаты поиска

Содержание MPC 60

Отзывы: