Akai MPC 60 Скачать руководство пользователя страница 51

Страница: 51 / 228

Section 3: Recording sequences

MIDI SOFT THRU field may be set incorrectly. If so, please read section

9.2 to learn more about this field.

Next, create the new sequence format of 4 bars of 4/4 time:

1. Move the cursor to the SQNC field and select 80 (ENTER) or any

other sequence which is currently empty.

2. Press the EDIT key. The following screen will appear:

3. Select option 2: "Create sequence". The following screen will appear:

4. Enter the data fields as shown in the above screen.

5. Press <Execute> (SOFT KEY 1). This will erase the existing contents

of the sequence and create a new format of 4 bars of 4/4 time. Once

finished, the previous EDIT screen will be redisplayed.

6. Press MAIN SCREEN to return to the PLAY/R.ECORD screen.

Note: Whenever you start recording in an empty sequence, the settings in

this screen are used to create the default format of time signature and

number of bars for that new sequence. Now that you have changed these

settings to "4 bars of 4/4, looped", all newly recorded sequences will default

to this format, instead of the factory set default of "2 bars of 4/4, looped".

Also, these settings, as well as the contents of most other data fields in the

MPC60, are remembered with the power off, so this new default will remain

active until changed, even if you turn the power off and on again.

Содержание MPC 60




































































































































































































































Результаты поиска

Содержание MPC 60

Отзывы:

Akai MPC 60, Руководство оператора, Страница: 51 / 228

Результаты поиска

Содержание MPC 60

Отзывы: