Akai MPC 60 Скачать руководство пользователя страница 148

Страница: 148 / 228

6.8 Triggering a sound from an external signal-the
Audio trigger

This feature of the MPC60 allows one of the internal drums to be triggered

by an external audio signal. The triggering is nondynamic. If dynamic

triggering, or triggering of more than one drum is needed, you must use a

trigger to midi converter, available from many manufacturers, and trigger

the drums over midi.

To select this feature, choose option 7, AUDIO TRIGGER, from the

SOUNDS screen, and the following screen will be displayed:

To use this feature, connect the triggering signal to the SYNC INPUT on

the rear panel of the MPC60. The triggering signal can be any percussive

sound, but best results will be achieved by using a signal of consistent

dynamics and no background noise. The SYNC INPUT LEVEL control on

the rear panel should be used to set the triggering threshold. The only field

on this screen is the PLAYS DRUM field. This is used to select which of

the 32 drums will play when the signal is received. Since the triggering is

non-dynamic, the drum will always play at full volume.

NOTE: Triggering can only be done while this screen is showing, and

therefore sequences can not be played while triggering is being done.

148

Содержание MPC 60




































































































































































































































Результаты поиска

Содержание MPC 60

Отзывы:

Akai MPC 60, Руководство оператора, Страница: 148 / 228

Результаты поиска

Содержание MPC 60

Отзывы: