Akai MPC 60 Скачать руководство пользователя страница 84

Страница: 84 / 228

4.1 Overview

This section of the manual describes the functions which relate to the

editing of sequence data. In this section, you will learn to:

• Erase drums or notes in real time while in overdub mode.

• Erase selected drums, notes, or other midi events while stopped.

• View a list of the sequence's time signature changes and number of bars

for each change.

• Create a new format of time signature / number of bars .

• Insert blank bars into a sequence.

• Delete selected bars from a sequence.

• Copy a selected range of bars from a sequence and insert them

elsewhere into the same or another sequence.

• Copy a range of bars from one track to another track.

• Merge two tracks together.

• Copy one sequence over another.

• Convert a song (song mode) into one long sequence for more

detailed editing.

• Shorten or lengthen a bar by changing its time signature.

• Change the velocity or duration values of a group of notes after

recording.

Содержание MPC 60




































































































































































































































Результаты поиска

Содержание MPC 60

Отзывы:

Akai MPC 60, Руководство оператора, Страница: 84 / 228

Результаты поиска

Содержание MPC 60

Отзывы: