Akai MPC 60 Скачать руководство пользователя страница 118

Страница: 118 / 228

SMPTE number which, when syncing to SMPTE, is assigned to the exact

beginning of the song. Normally, this is set to all zeroes.

• The CONTENTS OF STEP field:

This is the current step number (1 - 256) within the current song. The data

displayed below this field is the data contained within this step number.

• The SQNC field:

This field indicates the sequence number contained in the current step. To

the right is the selected sequence's 16 character name. The name of the

sequence may be edited here, and the new name will be displayed when the

PLAY/RECORD screen is displayed.

• The REPS(0=END) field:

This field indicates the number of the repetitions that the sequence in the

current step will play before moving on to the next step. For example, if you

want the sequence to play only once in the current step, a "1" should be

entered here. If a "0" is entered here, the MPC60 will recognize this step as

the end of the song, and either stop playing or loop to a previous step

number, depending on the settings of the END and LOOP fields.

• The BARS field:

This field shows the total number of bars in the selected sequence.

• The TEMPO field:

This field shows the sequence tempo (the tempo value stored within the

sequence- not the master tempo) of the selected sequence.

• The NOW field:

This has nearly the same effect as in the PLAY/R,ECORD screen,

except that in song mode this number refers to the current position

within the SONG, not the sequence.

• SOFT KEY 1- <Insert B4>:

Pressing this soft key enables a new step to be inserted immediately before

the current step. It copies the contents of the current step and all higher

numbered steps up by one step, allowing the current step to be used for the

new data without overwriting any existing data.

• SOFT KEY 2 - <Delete>:

Pressing this soft key deletes the contents of the current step and copies

all higher numbered steps down by one position to close the gap-

SOFT KEY 3 - <Step- 1>:

Pressing this soft key decrements the step field.

• SOFT KEY 4 - <Step+1>:

Pressing this soft key increments the step field.

118

Содержание MPC 60




































































































































































































































Результаты поиска

Содержание MPC 60

Отзывы:

Akai MPC 60, Руководство оператора, Страница: 118 / 228

Результаты поиска

Содержание MPC 60

Отзывы: