Akai MPC 60 Скачать руководство пользователя страница 184

Страница: 184 / 228

184

stands for "Frequency Shift Keying at 24 2400 Hz/1200 Hz

transitions per 1/4 note". This code contains only timing clocks. It

does not contain positioning information, so when syncing back

from tape, you must start the MPC60 from the beginning of the

song in order for it to play in sync. This code does contain tempo

information, so be sure the MPC60 is set to the intended tempo

when recording this signal onto tape.

2. PULSE96:

This signal is not very common and is used for sync to other

devices only - not for tape sync. It stands for "Pulse sync at 96

high/low transitions per 1/4 note". This is the internal clock

resolution of the MPC60. This code contains no location

information, so you must set both the MPC60 and the receiving

device to the start of their sequences in order for both to play in

sync. When an external device is syncing to the MPC60, the tempo

is controlled by the MPC60.

• The MIDI CLOCK field (appears in all modes): The "Midi clock with

song position pointer" signal is output while the MPC60 is playing. This

field selects which of the four Midi outputs it will be output through.

There are five options:

• OUT1:

It is output through midi output jack 1.

• OUT2:

It is output through midi output jack 2.

• OUTS: It is output through midi output

jack 3.

• OUT4:

It is output through midi output jack 4.

• OFF:

The midi clock signal is not generated at all.

• SOFT KEY 1 - <GenSMPTE> (All sync input modes):

Pressing this soft key displays the following screen, which is used to generate

SMPTE time code:

SMPTE time code is only generated while this screen is showing. It is not

generated while the MPC60 is playing. The actual code is

Содержание MPC 60




































































































































































































































Результаты поиска

Содержание MPC 60

Отзывы:

Akai MPC 60, Руководство оператора, Страница: 184 / 228

Результаты поиска

Содержание MPC 60

Отзывы: