Akai MPC 60 Скачать руководство пользователя страница 21

Страница: 21 / 228

Section 2: The Basics

2.5 The SOFT KEYS (1 - 4)

In the upper right corner of the front panel are four buttons labeled SOFT

KEY 1, SOFT KEY 2, SOFT KEY 3 and SOFT KEY 4. The functions of

these buttons change from one screen to another and are always displayed

on the lowest line of the screen. For example, while the PLAY/RECORD

screen (accessed by pressing the MAIN SCREEN button) is showing. notice

the lowest line:

There are four titles enclosed in angle brackets ("<" and ">"). The titles are

<Trak=ON >, <Solo=OFF>, <Tmpo=SEQ> and <SortTrks>. These

four titles indicate the functions of the four soft keys, but only while this

screen is showing. Each of the many functions in the MPC60 displays a

unique screen of data, and the lowest line of each of these screens indicates

the function of the 4 soft keys while that screen is showing. Demonstrate

this by pressing the ERASE key, then the TIMING CORRECT key, then

MAIN SCREEN to return to the PLAY/RECORD screen. Some screens

have less than four active soft keys and some have none.

Содержание MPC 60




































































































































































































































Результаты поиска

Содержание MPC 60

Отзывы:

Akai MPC 60, Руководство оператора, Страница: 21 / 228

Результаты поиска

Содержание MPC 60

Отзывы: