manualshive.com logo in svg

Akai MPC 60, Руководство оператора, Страница: 93 / 228

Поделиться
Скачать
Akai MPC 60 Скачать руководство пользователя страница 93

 

 

Section 4:Editing sequences

 

93

The on-screen fields are described below:

 

• The SEQUENCE field (in the COPY ALL TRACKS FROM section): 
This field is used to specify the sequence number to be copied from. 

 

• The FROM BAR and TO BAR fields:

  

These fields set the range of bars to be copied from. FROM BAR sets 
the 1st bar which is to be copied, and TO BAR sets the 

end 

of the region 

to be copied (the bar number following the last bar to be copied). 

 

• The SEQUENCE field (in the COPY ALL TRACKS TO section): 
This field is used to specify the sequence number to be copied to. 

 

• The COPIES field:  
This field specifies the number of copies of the specified data will be 
inserted into the insertion point. Normally, this would be set to 1. 

 

• The INSERT BEFORE BAR field:  
This field specifies the bar number which the copied data will be inserted 
before. To insert the bars after the end of the sequence, enter here the 
number of the bar which is one higher than the last bar of the sequence. 

 

• SOFT KEY 1- <Execute>:  
Pressing this soft key performs the copy according to the entered 
parameters. 

 

NOTE: If the sequence is set to loop to an earlier bar (in the time 
signature / ending status screen) and the copied bars are inserted before 
the loop bar, causing the sequence to now loop to a different bar, the bar 
number specified in the LOOP field will automatically be adjusted to 
compensate for the insertion. 

4.3.6 Copying a single track to another area or merging it with 
other data 

 

This function permits the copying of all events within a specified 
region on a single track to a different point on the same or another 

Содержание MPC 60





































































































































































































































Отзывы:

Нет отзывов