Akai MPC 60 Скачать руководство пользователя страница 168

Страница: 168 / 228

168

As the screen warns, loading this file will replace all existing system

parameters with the newly loaded file's settings. To load the file, press

<Load it>. After loading, the previous screen will be redisplayed.

Erasing files

• If <Erase it> is pressed, the following warning screen is presented,

asking you to verify that you want to erase the selected file:

If you are sure, press <Erase it>, and the file will be erased permanently

from the disk. Once erased, the previous screen is redisplayed.

Renaming files

• If <Rename> is pressed, the following screen is displayed:

Rename a file

Rename the file:MY_FAVORITE_SONG.SEQ

to the new name:MY SONG

.SEQ

The upper line shows the current name of the file. The cursor rests in the

lower line, waiting for you to enter the new name. To enter the new name,

use the same method as in naming a sequence:

Содержание MPC 60




































































































































































































































Результаты поиска

Содержание MPC 60

Отзывы:

Akai MPC 60, Руководство оператора, Страница: 168 / 228

Результаты поиска

Содержание MPC 60

Отзывы: